| Manufacturer | Model | Article | Type | Bus | Retro | Protocol | Booster |
|---|---|---|---|---|---|---|---|
| Fleischmann | LokBoss | 6865 | C. Station + Throttle | Loconet | - | DCC | 2,5A |
| Fleischmann | Twincenter | 6802 | C. Station | Loconet, MausBus | S88 | DCC, FMZ, SX | 3A |
This small command station only manages locomotives 1 to 4 and their functions F0 to F2 but has a Loconet interface.
If it is powered, it acts as a command station and another LokBoss can be connected to it using a Loconet cable. If it is not powered, it acts as a throttle to connect to another LokBoss or to the TwinCenter command station. Unfortunately, with the Digikeijs DR5000 command station does not work correctly.
This multiprotocol command station (DCC, FMZ, Selectrix) developed by Uhlenbrock is like its Intellibox but instead of supporting the MM2 protocol it supports Fleischmann's FMZ protocol.
It has two controls knob with encoder so you can control two locomotives at the same time and their functions F0 to F8. In addition, you can connect the Lokboss throttles for Loconet and Roco Lokmaus1 for MausBus, being able to choose any address for them. The feedback is via the S88 bus and has an RS232 interface for connection to a computer.
I got it with version V1.000 and was able to update it to version V1.100 thanks to its serial port. I have not located the update to version V2.000 but in addition to being paid, it requires entering some codes on the Fleischmann website, which is no longer available so I could not update it either.