DWS443I message includes a pair (origin, ns).
"Origin" has to be "I" for the following codes to be applicable !
"NS" is "CC+DD".
===============================================================
. .
. NS Interface CAUSE & DIAGNOSTICS CODES. .
. .
=CC==DD========================================================
01 Real Line problems. (LAMLSENS)
. X'18 Hardware error (LC2)
. X'19 Timeout. (LC3)
. X'1A Scanner down at C.D. (LC3)
. X'1B Timeout + Scanner down at C.E. (LC3)
. X'1C Scanner down at C.E. (LC3)
. X'20 Set Mode, Box error.
. X'21 Set Mode, No box error.
. X'22 Enable, Modem Check.
. X'23 Enable, Box error.
. X'24 Enable, No box error.
. X'25 Monitor For Call, T.O.
. X'26 Call Request, TIMEOUT. +++ V.25 bis
. X'27 " + INVALID. .
. X'28 " + DELAYED CALL. .
. X'29 " + COLLISION. .
. X'2A " + CALL FAIL, engaged tone received. .
. X'2B " + CALL FAIL, local DCE busy. .
. X'2C " + CALL FAIL, ring tone received. .
. X'2D " + CALL FAIL, abort call. .
. X'2E " + CALL FAIL, no answer tone detected. .
. X'2F " + CALL FAIL, forbidden call. .
. X'30 " + CALL FAIL, unknown cause .
. X'31 " + CALL FAIL, other. .
. X'32 " + timeout ECO. --- V.25 bis
. X'33 Receive, modem check.
. X'34 Transmit, modem check.
. X'35 Monitor For Call, hardware error.
. X'36 Call Request, hardware error.
. X'37 Monitor Incomming Call timeout, 3720-25.
. X'98 Scanner down
. X'99 Modem check
. X'9A Hardware error or timeout
. X'FE DISCONNECT recibido del Host.
--------------------------------------------------------------.
02 Real PU problems. (LADLCDRC)
. X'01 incorrect frame received (I- no command,etc)
. X'02 no response to FRMN1 number of RR's.
. X'03 incorrect frame received (S with data, ...
. ..., U with data, FTMR without 3 bytes).
. X'04 incorrect frame received (I too long)
. X'05 no response to FRMN1 number of RNR's.
. X'08 incorrect frame received (NS not valid)
. X'09 no answer to SABMNUM SABM's, switched link.
. X'0F DM received
. X'2F SABM received
. X'43 DISC received
. X'63 UA received
. X'87 FRMR received
--------------------------------------------------------------.
03 Switched Link problems.
--------------------------------------------------------------.
04 NS Request General Errors.
. x'01 Unknown Request.
--------------------------------------------------------------.
05 NS Connect Request Error.
. X'02 M packet too long. (F)
. X'0F No free virtual Circuit available.
. X'10 M Remote NSAP: Packet too short (No RNL)
. X'11 M length = 0. (F)
. X'12 M length > 12. (F)
. X'13 M too short. (RNSAP < RNL)(F)
. X'14 M IDP not 460021
. X'20 M Local NSAP : Packet too short (No LNL)
. X'21 M length = 0. (F)
. X'22 M length > 32. (F)
. X'23 M too short. (LNSAP < LNL)(F)
. X'24 M IDP ERROR (not 460021)
. X'30 M Destination phone number: NO DPL. (F)
. X'31 M LEASED - lng not 0
. X'32 M PSTN - lng = 0.
. X'33 M PSTN - lng > 20.(F)
. X'34 M PSTN - V25B(3720/5)
. X'35 M PSTN - NO SWITCH TY
. X'36 M PSTN - INVALID S.T.
. X'37 M PSTN - DPN < DPL(F)
. X'40 M CBT Type ID : Too Short (No CTL) (F)
. X'41 M length = 0. (F)
. X'42 M length > 15. (F)
. X'43 M too short (CBTID < CTL)(F)
. X'50 M Local DTE address : Too short (No LDL)
. X'51 M length = 0. (F)
. X'52 M lng > 2. Leased(F)
. X'53 M PSTN - lng < 2
. X'54 M PSTN - lng > 20. (F)
. X'55 M too short(LDT < LDL)
. X'56 M S.PSTN - NOT ALFANUM DTE
. X'57 M S.PSTN - FIRST CHAR]='9'
. X'58 M Remote DTE address : Switched line.
. X'59 M Remote DTE address : < min.
. X'5A M Remote DTE address : > max.
. X'5B M Remote DTE address : not enough.
. X'5C M Remote DTE address : non alpha.num.
. X'60 Connect-Out in progress.
. X'61 Already connected.
. X'70 SAG NSAP check, remote length error.
. X'71 SAG NSAP check, remote byte error.
. X'72 SAG NSAP check, local length error.
. X'73 SAG NSAP check, local byte error.
. X'74 SAG NSAP check, remote = 0, local not.
. X'75 SAG NSAP check, local = 0, remote not.
--------------------------------------------------------------.
06 NS Connect Response Error.
. X'01 Packet too short. (F)
. X'02 M Packet too long. (F)
. X'03 M NO MORE DATA IN PIU (GETTING PNL)
. X'04 M Responding NSAP length = 0. (F)
. X'05 M Responding NSAP length > 12. (F)
. X'06 M NO MORE DATA IN PNSAP (PNSAP < PNL)
. X'07 M PNSAP IDP INCORRECT (not 460021)
. X'08 C NS Int. not in CON-IN in Progress.
. X'09 C Virtual Circuit not established.
. X'E7 SAG NSAP check, local length = 0. ex-x'0A
. X'E7 SAG NSAP check, local length error. ex-x'0B
. X'E7 SAG NSAP check, local byte error. ex-x'0B
--------------------------------------------------------------.
07 NS Data Request Error.
. X'01 Packet too short. (F)
. X'02 M Packet too long. (More than 8KB). (F)
. X'03 M 0 DATA IN DATA REQUEST. (F)
. X'04 no NS-Connect issued.
. X'05 VC not established (yet).
. X'06 PSDU exceeds 8k bytes. (F)
--------------------------------------------------------------.
08 NS Reset Request Error.
. X'01 Packet too short. (F)
. X'02 M Packet too long. (F)
. X'03 M NO DATA GETING ORIGINATOR
. X'04 M BAD ORIGINATOR (not CBT)
. X'05 M No Data GETING CAUSE
. X'06 M No Data GETING DIAG.
. X'07 Virtual Circuit not established
. X'08 NS Int. not in Connected State.
--------------------------------------------------------------.
09 NS Reset Response Error.
. X'01 M Invalid MSG Length of Reset Resp (F)
. X'02 C Virtual Circuit not established
. X'03 C NS Int. not in Reset IN in Progress
--------------------------------------------------------------.
0A NS Disconnect Request Error.
. X'01 Packet too short. (F)
. X'02 M Packet too long. (F)
. X'03 M NO DATA GETING ORIGINATOR
. X'04 M BAD ORIGINATOR (not CBT)
. X'05 M ERROR GETING CAUSE (NO DATA)
. X'06 M ERROR GETING DIAG. (NO DATA)
--------------------------------------------------------------.
0B X.25 Protocol Error.
. X'06 TC - unexpected RESET Request
. X'07 TC - unexpected RESET Confirmation
. X'08 TC - unexpected CALL Connected
. X'09 TC - unexpected Incomming CALL
. X'0A CBO - I.C., NSAP not found.
. X'0B CBO - I.C., PU status error.
--------------------------------------------------------------.
0C Internal Error.
. X'01 SAG end of Buffer Pool.
. X'02 invalid Generate Indication Request.
. X'03 M INCORRECT TACBID
. X'04 M PIU PONTER IS NULL
. X'05 M TEST PIU ERROR. FREEBIT=0.
. X'06 M TEST PIU ERROR. C2 ERROR
. X'07 M LENGTH PIU ERROR
--------------------------------------------------------------.
0D TC Error.
. X'01 C TAOPER from VCM not valid
. X'02 C Return from XGET with no PACKET
. X'03 C Application Not Active
. X'04 C Error Return from Simulator
. X'05 C NS Code to Build Message Invalid
. X'06 C Window Closed TO Expired
. X'07 C NS not in CONN State for Host data
. X'08 C NS not in CONN State for Net data
. X'09 C Virtual Circuit Not Established
. X'0A C Unexpected RU
. X'0B C No PIU provided after XGET
. X'0C C No PIU provided after HGET
. X'0D C No RSP PIU provided by Simulator
--------------------------------------------------------------.
0E VCM Error.
. X'01 CMVNEI Ana CC, not enough data for DTE addr.
. X'02 CMVNEI Ana CC, facilities length exceeds max.
. X'03 CMVNEI Ana CC, not enough data for fac.length
. X'04 CMVNEI Ana CC, Call User Data found.
. X'05 CMVNEI Ana CC, Fclty Marker 2d byte not found
. X'06 CMVNEI Ana CC, non valid Fclty Marker 2d byte
. X'07 CMVNEI Ana CC, Unknown Class-A Facility code.
. X'08 CMVNEI Ana CC, Called Line Addr Mdfy Ntfy par
. X'09 CMVNEI Ana CC, Unknown Class-B Facility code.
. X'0A CMVNEI Ana CC, Pkt size neg. 1-st parm miss
. X'0B CMVNEI Ana CC, CALLED DTE packet size < min.
. X'0C CMVNEI Ana CC, CALLED DTE packet size >= max.
. X'0D CMVNEI Ana CC, Pkt size neg. 2-nd parm miss
. X'0E CMVNEI Ana CC, CALLING DTE packet size < min.
. X'0F CMVNEI Ana CC, CALLING DTE packet size >= max
. X'10 CMVNEI Ana CC, Wdw size neg. 1-st parm miss
. X'11 CMVNEI Ana CC, CALLED DTE window not valid.
. X'12 CMVNEI Ana CC, Wdw size neg. 2-nd parm miss
. X'13 CMVNEI Ana CC, CALLING DTE window not valid.
. X'14 CMVNEI Ana CC, Class-C Facility code found.
. X'15 CMVNEI Ana CC, Class D Facility not "PROT".
. X'16 CMVNEI Ana CC, Prot Fac : no data after code.
. X'17 CMVNEI Ana CC, Prot Fac : nul field length.
. X'18 CMVNEI Ana CC, Prot Fac : not enough data.
. X'19 CMVNEI Ana CC, idem for Throughput Class Negotiatio
. X'1A CMVNEI Ana CC, Called Addr Ext : no data after code
. X'1B CMVNEI Ana CC, Called Addr Ext : nul field length.
. X'1C CMVNEI Ana CC, Called Addr Ext : not enough data.
. X'1D CMVNEI Ana CC, Input x42 in x0F > in x0B.
. X'1E CMVNEI Ana CC, Output x42 in x0F > in x0B.
. X'1F CMVNEI Ana CC, Input x43 in x0F > in x0B.
. X'20 CMVNEI Ana CC, Output x43 in x0F > in x0B.
. X'21 CMVNEI Ana IC, no data after ITP in IC.
. X'22 CMVNEI Ana IC, not enough data for DTE addr.
. X'23 CMVNEI Ana IC, no Facilities in IC.
. X'24 CMVNEI Ana IC, null facilities length in IC.
. X'25 CMVNEI Ana IC, facilities length > 110.
. X'26 CMVNEI Ana IC, packet too short for Fac. lng
. X'27 CMVNEI Ana IC, unknown Class-A facility code.
. X'28 CMVNEI Ana IC, not enough data for Called Lin
. X'29 CMVNEI Ana IC, Facility Marker 2d byte miss
. X'2A CMVNEI Ana IC, non valid Fclty. Marker 2-nd b
. X'2B CMVNEI Ana IC, Unknown Class-B Facility code.
. X'2C CMVNEI Ana IC, not enough data for Pkt size n
. X'2D CMVNEI Ana IC, CALLED DTE packet size < min
. X'2E CMVNEI Ana IC, CALLED DTE packet size > max
. X'2F CMVNEI Ana IC, Pkt size 2-nd parameter miss
. X'30 CMVNEI Ana IC, CALLING DTE packet size < min
. X'31 CMVNEI Ana IC, CALLING DTE packet size > max
. X'32 CMVNEI Ana IC, window size neg. 1-st par miss
. X'33 CMVNEI Ana IC, non valid CALLED DTE pkt wdw
. X'34 CMVNEI Ana IC, window size neg. 2-nd par miss
. X'35 CMVNEI Ana IC, non valid CALLING DTE pkt wdw
. X'36 CMVNEI Ana IC, Class-C Facility code found.
. X'37 CMVNEI Ana IC, Unknown Class-D Fclty code fou
. X'38 CMVNEI Ana IC, Calling Addr Ext 1-st parm mis
. X'39 CMVNEI Ana IC, Calling Addr Ext null 1-st par
. X'3A CMVNEI Ana IC, Calling Addr Ext 1-st parm > m
. X'3B CMVNEI Ana IC, Calling Addr Ext 2-nd parm mis
. X'3C CMVNEI Ana IC, Calling NSAP not found.
. X'3D CMVNEI Ana IC, Called Addr Ext 1-st parm miss
. X'3E CMVNEI Ana IC, Called Addr Ext null 1-st parm
. X'3F CMVNEI Ana IC, Called Addr Ext 1-st parm > ma
. X'40 CMVNEI Ana IC, Called Addr Ext 2-nd parm miss
. X'41 CMVNEI Ana IC, Called NSAP not found.
. X'42 CMVNEI Ana IC, Call User Data field not found
. X'43 CMVNEI Ana IC, Protocol id <> x'CA.
. X'44 CMVNEI Ana IC, Protocol id length > 8.
. X'45 CMVNEI Ana IC, Not enough data for CUG.
. X'46 CMVNEI Ana IC, Not enough data for RCH.
. X'47 CMVNEI Ana IC, No data after Prot. Fac. code
. X'48 CMVNEI Ana IC, Null Facility Prot. Length.
. X'49 CMVNEI Ana IC, Not enough data for Prot. Fac.
. X'4A CMVNEI Ana IC, idem for Throughput Class Negotiatio
. X'61 Input pkt length (U3TCNT) < 3 bytes.
. X'62 Input pkt with invalid GFI Q or D bits.
. X'63 Input pkt with unmatching GFI module.
. X'64 Input pkt received in INOP status.
. X'65 Received unknown pkt type.
. X'66 Received DAFC pkt in no valid status.
. X'67 Data pkt too short.
. X'68 Data pkt too large.
. X'69 Received RR/RNR pkt with M bit on.
. X'6A Unknown DFC pkt.
. X'6B Invalid PR received.
. X'6C Invalid PS received.
. X'6D Receive window exceeded.
. X'6E Received unexpected RESET CONF.
. X'6F Received unexpected CLEAR CONF.
. X'70 Received CLEAR IND w/o cause & diag.
. X'71 Received CALL IND in no CRDY status.
. X'73 Received unexpected CALL CONNECTED.
. X'77 Input pkt after CLEAR IND.
. X'78 Received RESET w/o cause & diag.
. X'7D Unresponded RESET REQ.
. X'7E Unresponded CALL REQ.
. X'7F Host RESET, DISABLE or DISCONTACT req.
. X'81 Invalid interface COMMAND or DATA req.
. X'82 Invalid code for TC entry.
. X'83 Invalid register for TC entry.
. X'84 Invalid PUCB status for ENABLE.
. X'85 Invalid PUCB status for CONTACT.
. X'86 Invalid PUCB status for DISCONTACT.
. X'87 Invalid HPUT TC request.
. X'88 Invalid XGET/XPUT TC request.
. X'89 Invalid HRSP TC request.
. X'8A Invalid TC HANG request.
. X'8B Invalid TC FREE request.
. X'8C XCALL, network not active.
. X'8D XCALL, PUCB not in APCT status.
. X'8E XCALL, no logical channel free.
. X'8F XCALL, line with call established.
. X'90 XDISC, network not active.
. X'91 XDISC, PU not in APCT status.
. X'92 XDISC, line w/o call established.
. X'93 XCALLA, network not active.
. X'94 XCALLA, PU not in APCT status.
. X'95 XCALLA, VCCB not linked.
. X'96 XCALLA, not in Call Ind Resp pend stat.
. X'97 XRSTF, network not active.
. X'98 XRSTF, PU not in APCT status.
. X'99 XRSTF, VCCB not linked.
. X'9A XRSTF, not in Reset Ind resp pend stat.
. X'9B XRSTR, network not active.
. X'9C XRSTR, PU not in APCT status.
. X'9D XRSTR, VCCB not linked.
. X'9E XRSTR, no DRDY, no RSTI status.
. X'9F XDIAL, PU not in APCT status.
. X'A0 XDIAL, no switched network.
. X'A1 XDIAL, Net active, net_type S, ns_conn D.
. X'A2 XDIAL, Net_type or ns_conn no valid.
. X'A3 XDIAL, Net dialing out, net_type S, ns_conn S o D
. X'A4 XDIAL, 'dial in' in progress, ns_conn D.
. X'A5 XDIAL, Real line not in MFC (activate pu).
. X'A6 XDIAL, Xio not for real line.
. X'A7 XDIAL, Any other rc from xio.
. X'A8 XDIAL, Net activated by a DIAL IN, x25 call ind
. for another cbt, ns_conn (xdial) rejected.
. X'A9 XDIAL, Net inact,L1 up, net_type 'S', ns_conn 'D'
. X'AA XDIAL, Net inact-L1 up, net_type/ns_conn no valid
. X'AB XDISC, VCCB in invalid status.
. X'FF XIO rejected by CMVVCM.
--------------------------------------------------------------.
0F PLM Error.
. X'74 CMVPLM RECEIVED UNSOLICITED RESTART CONF
. X'75 CMVPLM RECEIVED UNEXPECTED RESTART.
--------------------------------------------------------------.
10 MLC Error.
. X'92 PLM DISABLED.
. X'93 PLM req 'take net down' inactivity t.o.
. X'94 PLM req 'take net down' call ind t.o.
. X'A0 NO STATUS CHANGE, NO DATA AVAILABLE
. X'A1 CMD CONTACT RET COD DLC UNKNOWN.
. X'A1 CMD SENDATA RET COD DLC UNKNOWN
. X'A1 CMD DISCONTACT RET COD DLC UNKNOWN.
. X'A1 CMD RESET(DISCONTACT) RET COD DLC UNKNOWN
. X'A1 CMD ENABLE RET COD DLC UNKNOWN.
. X'A1 CMD DISABLE RET COD DLC UNKNOWN.
. X'A2 CMD ENABLE NOT ACCEPTED BY DLC.
. X'A2 CMD CONTACT NOT ACCEPTED BY DLC.
. X'A2 CMD SENDATA NOT ACCEPTED BY DLC.
. X'A3 NO PKT VALIDATED, NO INPUT PKT.
. X'A4 INCORRECT STATUS CHANGE.
. X'A8 MLC INTERNAL ERROR. PAQUETES
. X'A9 MLC INTERNAL ERROR. MLCFREE
. X'AE MLC INTERNAL ERROR. DISCPRO
=================== 011294. === CNM.USERS.CLISTS(NSCAUDIA) ====
MERVA
library, including SH12-6157-01,
MERVA/ECO Installation and User's Guide.
