# The programmer requires the following bits to be named:
#    power --- set to 1 when the programmer wants the PIC's Vdd = +5v
#    mclr  --- set to 1 when the programmer wants the PIC's /MCLR = +13v
#    clock --- used to clock data into the PIC (connect to PIC pin 12)
#    data  --- used to write data (pin 13)
#    data_f -- sense return for data (pin 13)
#    clock_f - sense return for clock (pin 12)

#    rb6   --- synonym for "clock"
#    rb7   --- synonym for "data"
#    rb6_f --- synonym for "clock_f"
#    rb7_f --- synonym for "data_f"

# Select your serial port :
base= 0x3f8    # com1, ttyS0
#base= 0x2f8   # com2, ttyS1
#base= 0x3e8   # com3, ttyS2
#base= 0x2e8   # com4, ttyS3

# Settings for TE-20 PIC programmer :

power: TxD
mclr: TxD
data: DTR
data_f: CTS
clock: RTS

This site is always under construction.

Actualitzat el 29 de Gener de 2008.